top of page

GLUES & ADHESIVES

We supply a range of glues and adhesives all over the UK, please give us a call on 07739 901266

to place an order.

GRIPBOND GAP-FILLING ADHESIVE.jpg

GRIPBOND GAP-FILLING ADHESIVE

A fast bonding, non-slumping, instant grab adhesive with good gap-filling properties even on uneven surfaces. Can replace mechanical fixings in a wide variety of applications. Can be used in all weather conditions and is suitable for rough and porous surfaces. It can also be over-painted once dry. Ideal for fixing a wide variety of materials. 

GRIPBOND WHITE SOLVENT-FREE ADHESIVE.jpg

GRIPBOND WHITE SOLVENT-FREE ADHESIVE

A premium, environmentally friendly, multi-purpose, gap-filling adhesive. Water based, totally solvent-free with quick grab properties. Cures to give a tough, durable and permanent bond. Can be used to replace or augment mechanical fixings when bonding brick, building panels, carpets, chip-boards, concrete, coving, floor panels, foam insulation, marble, metals, tiles and timber. 

SAVES NAILS.jpg

SAVES NAILS

 multi-purpose, solvent-based, gap-filling construction adhesive, that can replace mechanical fixings in a wide variety of domestic, commercial and industrial applications. A fast bonding adhesive with gap-filling properties to bridge gaps up to 12mm. It can be used in all weather conditions and is suitable for rough and porous surfaces. It has good low temperature resistance for freezers and cold applications. This product is toluene free.

SAVES NAILS SF.jpg

SAVES NAILS SF

Offering less impact on the environment, this solvent-free formula offers instant grab and a tough permanent bond on virtually any porous or non-porous surface. A low odour, water clean-up construction adhesive which cures to form a high strength bond. Extremely low VOC content. Contains no harmful raw materials, making it safer for the environment, safe for the user and safe on substrates.

CTT.jpg

CARPET TILE TACKIFIER

FLOORBOND CTT

A solvent-free acrylic emulsion providing a permanently tacky film for the removable fixing of “loose lay" carpet tiles. Enables tiles to be easily lifted and replaced when required. Non-staining, resistant to plasticiser migration and may be applied by either roller or brush. Can be applied to most common substrates, including concrete, cementitious screeds, chipboard, hardwood, plywood and more.

CONTACT ADHESIVE.jpg

CONTACT ADHESIVE

A premium grade, solvent-based, neoprene adhesive with high grab and long open time to enable re-positioning. May be used to bond lightweight materials to vertical surfaces and ceilings. It is predominantly designed for interior use but can be used externally when the adhesive is protected from direct sunlight and water. Can be used for bonding cork, leather, rubber, metals, wood, chipboard, hardboard, laminated plastics.

CONTACT SF.jpg

CONTACT ADHESIVE SF

A water dispersible adhesive with long open time to enable re-positioning. May be used to bond lightweight materials to vertical surfaces and ceilings. It is predominantly designed for interior use but can be used externally when the adhesive is protected from direct sunlight and water. Can be used for bonding cork, leather, rubber, metals, wood, chipboard, hardboard, laminated plastics (e.g. Formica), dense textiles, plaster, stone and concrete.

DUO.jpg

DUO 2 IN 1 WOOD GLUE

A fast drying, water-resistant, PVA wood adhesive with a bond strength stronger than the wood itself. For use as a general purpose, joinery adhesive, or for applications where long term resistance to moisture is a pre-requisite of the adhesive. Rapid bond strength development. Suitable for hard and soft woods, decorative laminates, chipboard, blockwood and other engineered timber panels. 

D4.jpg

D4 WATERPROOF

WOOD ADHESIVE

A ready to use, solvent-free industrial grade PVA timber adhesive which is suitable for use in damp and humid conditions, inside and out, and gives a high strength, water, impact and temperature resistant bond that is usually stronger than the wood itself. Rapid bond strength development. Suitable for hard and soft woods, decorative laminates, chipboard, blockwood and other engineered timber panels. 

PVA BOND.jpg

CONTRACTORS PVA ADHESIVE & SEALER

An all purpose, contractors grade primer, sealer and bonding agent that dries quickly to give a high bond strength. Can be used with plaster, cement, timber, gypsum wall boards and paper. Properties as an adhesive include fast drying. It is also a readily dilutable primer for sealing applications or addition to cement and plaster to improve adhesion and cure. High solids content compared with other contractor grades.

MULTI-PURPOSE SPRAY LUBRICANT.jpg

MULTI-PURPOSE SPRAY LUBRICANT

It is a high performance, multi-application fluid which has excellent de-watering, anti-corrosive and general lubricating properties. Deep penetration aids dismantling rusted parts and fasteners and is ideal for lubricating locks, hinges and tools. Will help protect tools and metals from rusting and can be used as a starting aid for damp ignition systems.

.jpg

SILICONE RELEASE SPRAY

A clear, non-staining, non-volatile silicone lubricating oil in an aerosol can that provides a clear barrier. Excellent for lubricating machinery and moving parts against the build up of dust, hair and foreign matter and reduces squeaking. Spray in short bursts on to the surfaces that require lubrication, wipe away excess with a soft cloth. 

AEROSOL SPRAY ADHESIVE.jpg

AEROSOL SPRAY ADHESIVE

A non-chlorinated, exceptionally powerful, long lasting, multi-purpose adhesive in a can. Gives exceptionally strong adhesion for a wide range of demanding uses. Fitted with a variable discharge spray that controls the width of the fan. DCM Free. Use on wood, concrete, stone, tiles, rubber, foam, metals, rigid plastics, polyethylene, canvas fabrics, cardboard, paper and cork.

HIGH VISCOSITY CYANOACRYLATE SUPERGLUE.jpg

HIGH VISCOSITY CYANOACRYLATE SUPERGLUE

A high viscosity cyanoacrylate adhesive developed for bonding rubber and plastics including PVCu. For use on porous surfaces. Also has gap-filling properties making it ideal for bonding trims and caps on PVCu windows as well as rubber, wood, metal, ceramics, MDF, leather, porcelain and card. 

SUPERGLUE ACTIVATOR.jpg

SUPERGLUE ACTIVATOR

Accelerator for increasing the cure rate of cyanoacrylate adhesives. Improves bonding to difficult surfaces and prevents penetration of adhesive into porous materials. Speeds strength development. For difficult surfaces apply the Activator first. For fillets apply the Superglue first. Ultimate speed depends on adhesive type and viscosity.

D4 WOOD1.jpg

GLUE MONSTER D4 WATERPROOF

WOOD ADHESIVE

A ready to use, solvent-free industrial grade PVA timber adhesive which is suitable for use in damp and humid conditions, inside and out, and gives a high strength, water, impact and temperature resistant bond that is usually stronger than the wood itself. Rapid bond strength development. 

MITRE SYSTEM.jpg

MITRE SYSTEM KIT

A high strength bonding system comprising a cyanoacrylate adhesive and an aerosol activator. Spray aerosol lightly over one face of the joint and allow to dry. If possible, use on the least visible face of the completed joint. Apply activator to one surface and allow solvent to evaporate. Apply adhesive to the other surface and then bring together immediately. Apply gentle pressure.

RGC.jpg

RGC SUPERGLUE

CYANOACRYLATE

A rapid curing adhesive specially formulated to give good adhesion to most rubbers and plastics. Good humidity resistance of cured adhesive. Excellent adhesion to EPDM & SBR rubbers. For assembly of rubber bush systems; timbers and many plastics. All surfaces must be clean, dry and grease free. 

A43.jpg

A43 THREADLOCK

Used as a locking compound for direct application to lightly oiled components. Replaces spring washers and lock nuts. Allows for disassembly using the correct tools. Also prevents rusting or corrosion. Non-drip consistency for clean, economic application. Apply sufficient adhesive to coat the treads. The adhesive will start to cure on exclusion of air from the bonding system. 

A70.jpg

A70 STUDLOCK

A high strength, anaerobic adhesive for the permanent retention and sealing of threaded fasteners, sleeves and bearings. Resistant to fuels, oils, hydraulic and refrigeration fluids. Also acts as a lubricant during assembly to ensure accurate torquing and protection against corrosion. Prevents rusting or corrosion and cannot be dismantled once adhesive has set.

bottom of page