LEVELMASTER RANGE
We supply a range of high performance floor levelling compounds and cement based products all over the UK,
please give us a call on 07739 901266 to place an order.
LEVELMASTER STANDARD SELF-LEVELLING COMPOUND
A chloride-free, water based cementitious flooring compound that provides a level base for internal floors. An ideal, economical, underlay for all modern floor finishes.
LEVELMASTER RAPID LEVEL 30
One part, rapid setting, flexible interior and exterior latex floor levelling compound. A protein-free, one part, premium grade internal and external cementitious floor levelling compound suitable for use at thickness form 3mm to 50mm (can be bulked up to 60mm with the addition of chippings). When mixed with water it can be used to level floors providing an ideal base for most floor types.
LEVELMASTER
AD-FLOOR PLUS
A protein-free, flexible, high performance cementitious floor levelling compound. A protein-free, flexible, high performance internal cementitious floor levelling compound. Suitable for use at thicknesses from 3mm to 50mm (10 to 60mm bulked up with 3mm granite chippings).
UNIVERSAL RENDER
One coat rendering mortar for internal and external applications. A pre-mixed render based on sand, lime, cement and additives. A moderate strength render for moderate strength backgrounds and moderate exposure conditions. A 25kg bag of Bond It Universal Building Render should be mixed with 4-5L of clean water using a mechanical stirrer. Best results are obtained using as little water as possible.
CEM-QUIK
A cement based patch repair mortar. A cement based patch repair product which is simple to apply and sets hard in approximately 30 minutes. For internal and external repairs to most masonry substrates; for gap and crack filling, jointing and sealing earthenware pipes and drains, patching steps and windowsills, setting and bedding WC's, sinks, railings and posts. Fills holes and cracks in concrete, brick, blocks and stone. Sets in the cold and wet.
LIGHTWEIGHT
RENDER MESH
A glass fibre woven mesh, ideal for reinforcement of render or base coat plaster. A lighter weight, alkali resistant glass fibre woven mesh, ideal for the reinforcement of render or base coat plaster. An ideal anti-crack reinforcement for rendering systems. It is also widely used on external wall insulation systems, roof tiles and carpets.
MONSTER MESH
A glass fibre woven mesh, ideal for reinforcement of render or basecoat plaster. An alkali resistant glass fibre woven mesh, ideal for reinforcement of render or basecoat plaster. An ideal anti-crack reinforcement for rendering systems. For use in construction; mainly to reinforce concrete, cement, screeds and renders. ETICS external wall insulation systems with acrylic, polymeric, silicon, silicate and mineral renders, cracking surfaces repairs and tiling (as reinforcement).
TANKING SLURRY
A cementitious waterproof coating designed for use below and above ground for cellars, retaining walls, and tanks. A blend of Portland cements, quality graded aggregates and chemical modifiers, which provide a waterproof coating system. For use on tanks, pits and swimming pools, above and below ground walls and floors, cellars, underground rooms, interior spaces, e.g. ducting, party walls, lift shafts and fish ponds.
PLUG-IT
A cement based rapid setting compound for plugging running water leaks. A cement based rapid setting watertight compound for plugging running water leaks and overcoating joints, prior to the application of Bond It Tanking Slurry. Cures in less than 2 minutes. Cut out the holes or cracks to a square (not a v) shape. Mix with water into a putty by hand, then with a gloved hand or trowel plug the mixture in to hole or crack and press hard until the plug has set.
FIRE CEMENT
A heat resistant fire cement. A buff coloured, cement which has a thick, paste like consisteny. Ready to use, blend of high quality clays and selected fillers that sets rock hard when exposed to heat and air. Resistant to high temperatures, once cured the mortar will resist temperatures up to 1250°C.